Booting Kernel 3.18.0-rc4 on cubieboard2

U-Boot SPL 2015.01-rc1-00014-g63f7af9-dirty (Nov 12 2014 – 22:55:28)
DRAM: 1024 MiB
CPU: 960000000Hz, AXI/AHB/APB: 3/2/2

U-Boot 2015.01-rc1-00014-g63f7af9-dirty (Nov 12 2014 – 22:55:28) Allwinner Technology

CPU: Allwinner A20 (SUN7I)
I2C: ready
DRAM: 1 GiB
MMC: SUNXI SD/MMC: 0
*** Warning – bad CRC, using default environment

In: serial
Out: serial
Err: serial
SCSI: SUNXI SCSI INIT
SATA link 0 timeout.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net: dwmac.1c50000
Hit any key to stop autoboot: 2  1  0
witch to partitions #0, OK
mmc0 is current device
Scanning mmc 0…
Found U-Boot script /boot.scr
reading /boot.scr
287 bytes read in 17 ms (15.6 KiB/s)
## Executing script at 43100000
reading uImage
2621080 bytes read in 155 ms (16.1 MiB/s)
reading sun7i-a20-cubieboard2.dtb
22767 bytes read in 29 ms (766.6 KiB/s)
## Booting kernel from Legacy Image at 46000000 …
Image Name: Linux-3.18.0-rc4-31376-g8c27ecb-
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2621016 Bytes = 2.5 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum … OK
## Flattened Device Tree blob at 49000000
Booting using the fdt blob at 0x49000000
Loading Kernel Image … OK
Loading Device Tree to 4fff7000, end 4ffff8ee … OK

Starting kernel …

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.18.0-rc4-31376-g8c27ecb-dirty (daniel@danand.de) (gcc version 4.9.1 (Ubuntu/Linaro 4.9.1-16ubuntu6) ) #1 SMP Wed Nov 12 15:09:36 CET 2014
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Cubietech Cubieboard2
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
[ 0.000000] PERCPU: Embedded 7 pages/cpu @eefd2000 s6912 r0 d21760 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260624
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait panic=10
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1034136K/1048576K available (3815K kernel code, 194K rwdata, 764K rodata, 240K init, 232K bss, 14440K reserved, 270336K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 – 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 – 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf0000000 – 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 – 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 – 0xc0000000 ( 2 MB)
[ 0.000000] .text : 0xc0008000 – 0xc0481014 (4581 kB)
[ 0.000000] .init : 0xc0482000 – 0xc04be000 ( 240 kB)
[ 0.000000] .data : 0xc04be000 – 0xc04eeb20 ( 195 kB)
[ 0.000000] .bss : 0xc04eeb20 – 0xc0528dc4 ( 233 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wy 286.000021] Switching to timer-based delay loop, resolution 41ns
[ 0.000302] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
[ 0.000435] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 26843545593ns
[ 0.000622] Console: colour dummy device 80×30
[ 0.000654] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.000670] pid_max: default: 32768 minimum: 301
[ 0.000802] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000814] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001383] CPU: Testing write buffer coherency: ok
[ 0.001688] /cpus/cpu@0 missing clock-frequency property
[ 0.001709] /cpus/cpu@1 missing clock-frequency property
[ 0.001723] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001789] Setting up static identity map for 0x403a3b30 – 0x403a3b88
[ 0.003125] CPU1: Booted secondary processor
[ 0.003174] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.003256] Brought up 2 CPUs
[ 0.003275] SMP: Total of 2 processors activated.
[ 0.003281] CPU: All CPU(s) started in HYP mode.
[ 0.003286] CPU: Virtualization extensions available.
[ 0.003931] devtmpfs: initialized
[ 0.007600] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[ 0.008101] pinctrl core: initialized pinctrl subsystem
[ 0.008471] regulator-dummy: no parameters
[ 0.013854] NET: Registered protocol family 16
[ 0.014211] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.018915] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.018931] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.025490] reg-fixed-voltage ahci-5v: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@0, deferring probe
[ 0.025520] platform ahci-5v: Driver reg-fixed-voltage requests probe deferral
[ 0.025549] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[ 0.025562] platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.025584] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
[ 0.025598] platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.025790] vcc3v0: 3000 mV
[ 0.026032] vcc3v3: 3300 mV
[ 0.026267] vcc5v0: 5000 mV
[ 0.026796] SCSI subsystem initialized
[ 0.027304] usbcore: registered new interface driver usbfs
[ 0.027353] usbcore: registered new interface driver hub
[ 0.027417] usbcore: registered new device driver usb
[ 0.027548] pps_core: LinuxPPS API ver. 1 registered
[ 0.027555] pps_core: Software ver. 5.3.6 – Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.027581] PTP clock support registered
[ 0.028543] Switched to clocksource arch_sys_counter
[ 0.037885] NET: Registered protocol family 2
[ 0.038574] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.038664] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.038785] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.038873] TCP: reno registered
[ 0.038890] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.038954] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.039214] NET: Registered protocol family 1
[ 0.039653] RPC: Registered named UNIX socket transport module.
[ 0.039668] RPC: Registered udp transport module.
[ 0.039674] RPC: Registered tcp transport module.
[ 0.039680] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.040260] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 0.041370] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.051566] NFS: Registering the id_resolver key type
[ 0.051641] Key type id_resolver registered
[ 0.051648] Key type id_legacy registered
[ 0.051857] bounce: pool size: 64 pages
[ 0.052064] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.052083] io scheduler noop registered
[ 0.052096] io scheduler deadline registered
[ 0.052257] io scheduler cfq registered (default)
[ 0.052543] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
[ 0.054769] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 0.111657] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.114693] console [ttyS0] disabled
[ 0.134860] dw-apb-uart 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A
[ 0.758262] console [ttyS0] enabled
[ 0.763310] platform 1c18000.sata: Driver ahci-sunxi requests probe deferral
[ 0.771275] stmmaceth 1c50000.ethernet: no regulator found
[ 0.776820] stmmaceth 1c50000.ethernet: no reset control found
[ 0.782687] Ring mode enabled
[ 0.785739] No HW DMA feature register supported
[ 0.790276] Normal descriptors
[ 0.793596] TX Checksum insertion supported
[ 0.801372] libphy: stmmac: probed
[ 0.804779] eth0: PHY ID 00008201 at 1 IRQ POLL (stmmac-0:01) active
[ 0.811276] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 0.817802] ehci-platform: EHCI generic platform driver
[ 0.823188] platform 1c14000.usb: Driver ehci-platform requests probe deferral
[ 0.830509] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
[ 0.837809] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 0.844065] ohci-platform: OHCI generic platform driver
[ 0.849444] platform 1c14400.usb: Driver ohci-platform requests probe deferral
[ 0.856726] platform 1c1c400.usb: Driver ohci-platform requests probe deferral
[ 0.864586] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
[ 0.871424] sunxi-rtc 1c20d00.rtc: RTC enabled
[ 0.875947] i2c /dev entries driver
[ 0.884322] axp20x 0-0034: AXP20X driver loaded
[ 0.890192] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 0.898607] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
[ 0.904542] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[ 0.948767] sunxi-mmc 1c0f000.mmc: base:0xf00ae000 irq:64
[ 0.955438] usbcore: registered new interface driver usbhid
[ 0.961061] usbhid: USB HID core driver
[ 0.965532] TCP: cubic registered
[ 0.968912] NET: Registered protocol family 17
[ 0.973502] Key type dns_resolver registered
[ 0.977877] Registering SWP/SWPB emulation handler
[ 0.984063] ahci-5v: 5000 mV
[ 0.987409] usb1-vbus: 5000 mV
[ 0.990900] usb2-vbus: 5000 mV
[ 1.018333] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.030563] mmc0: new high speed SDHC card at address aaaa
[ 1.036524] mmcblk0: mmc0:aaaa SU16G 14.8 GiB
[ 1.042539] mmcblk0: p1 p2
[ 1.058615] ahci-sunxi 1c18000.sata: controller can’t do PMP, turning off CAP_PMP
[ 1.066130] ahci-sunxi 1c18000.sata: SSS flag set, parallel bus scan disabled
[ 1.073309] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 1.082278] ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo only pio slum part ccc
[ 1.091745] scsi host0: ahci_platform
[ 1.095752] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[ 1.104065] ehci-platform 1c14000.usb: EHCI Host Controller
[ 1.109724] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
[ 1.117569] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000
[ 1.138545] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[ 1.145575] hub 1-0:1.0: USB hub found
[ 1.149432] hub 1-0:1.0: 1 port detected
[ 1.154103] ehci-platform 1c1c000.usb: EHCI Host Controller
[ 1.159758] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[ 1.167607] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000
[ 1.188538] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[ 1.195507] hub 2-0:1.0: USB hub found
[ 1.199339] hub 2-0:1.0: 1 port detected
[ 1.203879] ohci-platform 1c14400.usb: Generic Platform OHCI controller
[ 1.210552] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
[ 1.218404] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400
[ 1.283387] hub 3-0:1.0: USB hub found
[ 1.287173] hub 3-0:1.0: 1 port detected
[ 1.291771] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[ 1.298408] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
[ 1.306315] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400
[ .373415] hub 4-0:1.0: USB hub found
[ 1.377203] hub 4-0:1.0: 1 port detected
[ 1.381604] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:29 UTC (29)
[ 1.393773] vcc5v0: disabling
[ 1.396761] vcc3v0: disabling
[ 1.438556] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.468269] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.476492] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.491960] devtmpfs: mounted
[ 1.495219] Freeing unused kernel memory: 240K (c0482000 – c04be000)
Mount failed for selinuxfs on /sys/fs/selinux: No such file or directory
[ 1.861171] random: init urandom read with 4 bits of entropy available
[ 2.036824] init: plymouth-upstart-bridge main process (43) terminated with status 1
[ 2.045039] init: plymouth-upstart-bridge main process ended, respawning
[ 2.103719] init: plymouth-upstart-bridge main process (53) terminated with status 1
[ 2.111835] init: plymouth-upstart-bridge main process ended, respawning
[ 2.153667] init: plymouth-upstart-bridge main process (57) terminated with status 1
[ 2.161718] init: plymouth-upstart-bridge main process ended, respawning
[ 2.220654] init: ureadahead main process (46) terminated with status 5
* Sting Mount filesystems on boot[ OK ]
* Starting Populate /dev filesystem[ OK ]
* Stopping Populate /dev filesystem[ OK ]
* Starting Clean /tmp directory[ OK ]
* Starting Populate and link to /run filesystem[ OK ]
* Stopping Populate and link to /run filesystem[ OK ]
* Stopping Clean /tmp directory[ OK ]
* Stopping Track if upstart is running in a container[ OK ]
* Starting Initialize or finalize resolvconf[ OK ]
* Starting set console keymap[ OK ]
* Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
* Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
* Stopping set console keymap[ OK ]
* Starting Bridge udev events into upstart[ OK ]
* Starting Signal sysvinit that remote filesystems are mounted[ OK ]
* Starting device node and kernel event manager[ OK ]
* Starting load modules from /etc/modules[ OK ]
* Starting cold plug devices[ OK ]
* Starting log initial device creation[ OK ]
* Stopping load modules from /etc/modules[ OK ]
* Starting Uncomplicated firewall[ OK ]
* Starting configure network device security[ OK ]
* Starting configure network device security[ OK ]
* Starting Mount network filesystems[ OK ]
* Starting Upstart job to start rpcbind on boot only[ OK ]
* Stopping Upstart job to start rpcbind on boot only[ OK ]
* Stopping cold plug devices[ OK ]
* Starting load fallback graphics devices[ OK ]
* Stopping log initial device creation[ OK ]
rpcbind: cannot create socket for udp6
rpcbind: cannot create socket for tcp6
* Stopping load fallback graphics devices[ OK ]
* Starting set console font[ OK ]
* Stopping set console font[ OK ]
* Starting userspace bootsplash[ OK ]
The disk drive for / is not ready yet or not present.
keys:Continue to wait, or Press S to skip mounting or M for manual recovery
* Stopping userspace bootsplash[ OK ]
* Starting Send an event to indicate plymouth is up[ OK ]
* Starting configure network device[ OK ]
* Starting RPC portmapper replacement[ OK ]
* Stopping Mount network filesystems[ OK ]
* Starting configure network device[ OK ]
* Stopping Send an event to indicate plymouth is up[ OK ]
* Starting NSM status monitor[ OK ]
tarting Bridge socket events into upstart[ OK ]
* Starting Mount filesystems on boot[fail]
* Starting set console keymap[ OK ]
Root filesystem check failed.
A maintenance shell will now be started.
CONTROL-D will terminate this shell and reboot the system.
Give root password for maintenance
(or type Control-D to continue):
root@cubieNAS:~# rĖ›t

… frozen when pressing “m” for manual recovery

SPL 2015.01-rc1-00014-g63f7af9-dirty (Nov 12 2014 – 22:55:28)
DRAM: 1024 MiB
CPU: 960000000Hz, AXI/AHB/APB: 3/2/2

U-Boot 2015.01-rc1-00014-g63f7af9-dirty (Nov 12 2014 – 22:55:28) Allwinner Technology

CPU: Allwinner A20 (SUN7I)
I2C: ready
DRAM: 1 GiB
MMC: SUNXI SD/MMC: 0
*** Warning – bad CRC, using default environment

In: serial
Out: serial
Err: serial
SCSI: SUNXI SCSI INIT
SATA link 0 timeout.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net: dwmac.1c50000
Hit any key to stop autoboot: 2   0
sch to partitions #0, OK
mmc0 is current device
Scanning mmc 0…
Found U-Boot script /boot.scr
reading /boot.scr
287 bytes read in 17 ms (15.6 KiB/s)
## Executing script at 43100000
reading uImage
2621080 bytes read in 155 ms (16.1 MiB/s)
reading sun7i-a20-cubieboard2.dtb
22767 bytes read in 29 ms (766.6 KiB/s)
## Booting kernel from Legacy Image at 46000000 …
Image Name: Linux-3.18.0-rc4-31376-g8c27ecb-
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2621016 Bytes = 2.5 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum … OK
## Flattened Device Tree blob at 49000000
Booting using the fdt blob at 0x49000000
Loading Kernel Image … OK
Loading Device Tree to 4fff7000, end 4ffff8ee … OK

Starting kernel …

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.18.0-rc4-31376-g8c27ecb-dirty (daniel@danand.de) (gcc version 4.9.1 (Ubuntu/Linaro 4.9.1-16ubuntu6) ) #1 SMP Wed Nov 12 15:09:36 CET 2014
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Cubietech Cubieboard2
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
[ 0.000000] PERCPU: Embedded 7 pages/cpu @eefd2000 s6912 r0 d21760 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260624
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait panic=10
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1034136K/1048576K available (3815K kernel code, 194K rwdata, 764K rodata, 240K init, 232K bss, 14440K reserved, 270336K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 – 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 – 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf0000000 – 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 – 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 – 0xc0000000 ( 2 MB)
[ 0.000000] .text : 0xc0008000 – 0xc0481014 (4581 kB)
[ 0.000000] .init : 0xc0482000 – 0xc04be000 ( 240 kB)
[ 0.000000] .data : 0xc04be000 – 0xc04eeb20 ( 195 kB)
[ 0.000000] .bss : 0xc04eeb20 – 0xc0528dc4 ( 233 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000011] sched_clock: 56 bits at 24MHvery 2863311519744ns
[ 0.000024] Switching to timer-based delay loop, resolution 41ns
[ 0.000308] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
[ 0.000439] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 26843545593ns
[ 0.000625] Console: colour dummy device 80×30
[ 0.000654] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.000670] pid_max: default: 32768 minimum: 301
[ 0.000801] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000813] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001382] CPU: Testing write buffer coherency: ok
[ 0.001695] /cpus/cpu@0 missing clock-frequency property
[ 0.001715] /cpus/cpu@1 missing clock-frequency property
[ 0.001728] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001794] Setting up static identity map for 0x403a3b30 – 0x403a3b88
[ 0.003140] CPU1: Booted secondary processor
[ 0.003188] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.003267] Brought up 2 CPUs
[ 0.003285] SMP: Total of 2 processors activated.
[ 0.003291] CPU: All CPU(s) started in HYP mode.
[ 0.003295] CPU: Virtualization extensions available.
[ 0.003935] devtmpfs: initialized
[ 0.007598] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[ 0.008104] pinctrl core: initialized pinctrl subsystem
[ 0.008479] regulator-dummy: no parameters
[ 0.013867] NET: Registered protocol family 16
[ 0.014224] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.018920] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.018938] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.025500] reg-fixed-voltage ahci-5v: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@0, deferring probe
[ 0.025530] platform ahci-5v: Driver reg-fixed-voltage requests probe deferral
[ 0.025559] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[ 0.025573] platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.025593] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
[ 0.025606] platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.025806] vcc3v0: 3000 mV
[ 0.026039] vcc3v3: 3300 mV
[ 0.026272] vcc5v0: 5000 mV
[ 0.026809] SCSI subsystem initialized
[ 0.027313] usbcore: registered new interface driver usbfs
[ 0.027361] usbcore: registered new interface driver hub
[ 0.027418] usbcore: registered new device driver usb
[ 0.027549] pps_core: LinuxPPS API ver. 1 registered
[ 0.027557] pps_core: Software ver. 5.3.6 – Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.027584] PTP clock support registered
[ 0.028533] Switched to clocksource arch_sys_counter
[ 0.037901] NET: Registered protocol family 2
[ 0.038587] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.038676] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.038798] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.038887] TCP: reno registered
[ 0.038904] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.038969] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.039230] NET: Registered protocol family 1
[ 0.039653] RPC: Registered named UNIX socket transport module.
[ 0.039669] RPC: Registered udp transport module.
[ 0.039675] RPC: Registered tcp transport module.
[ 0.039681] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.040254] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 0.041353] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.051552] NFS: Registering the id_resolver key type
[ 0.051634] Key type id_resolver registered
[ 0.051641] Key type id_legacy registered
[ 0.051843] bounce: pool size: 64 pages
[ 0.052045] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.052064] io scheduler noop registered
[ 0.052076] io scheduler deadline registered
[ 0.052232] io scheduler cfq registered (default)
[ 0.052514] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
[ 0.054740] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 0.111630] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.114663] console [ttyS0] disabled
[ 0.134832] dw-apb-uart 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A
[ 0.758240] console [ttyS0] enabled
[ 0.763280] platform 1c18000.sata: Driver ahci-sunxi requests probe deferral
[ 0.771257] stmmaceth 1c50000.ethernet: no regulator found
[ 0.776800] stmmaceth 1c50000.ethernet: no reset control found
[ 0.782662] Ring mode enabled
[ 0.785715] No HW DMA feature register supported
[ 0.790250] Normal descriptors
[ 0.793571] TX Checksum insertion supported
[ 0.801343] libphy: stmmac: probed
[ 0.804751] eth0: PHY ID 00008201 at 1 IRQ POLL (stmmac-0:01) active
[ 0.811247] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 0.817775] ehci-platform: EHCI generic platform driver
[ 0.823162] platform 1c14000.usb: Driver ehci-platform requests probe deferral
[ 0.830483] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
[ 0.837784] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 0.844043] ohci-platform: OHCI generic platform driver
[ 0.849415] platform 1c14400.usb: Driver ohci-platform requests probe deferral
[ 0.856692] platform 1c1c400.usb: Driver ohci-platform requests probe deferral
[ 0.864548] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
[ 0.871384] sunxi-rtc 1c20d00.rtc: RTC enabled
[ 0.875908] i2c /dev entries driver
[ 0.883584] axp20x 0-0034: AXP20X driver loaded
[ 0.889481] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 0.897856] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
[ 0.903845] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[ 0.938766] sunxi-mmc 1c0f000.mmc: base:0xf00ae000 irq:64
[ 0.945440] usbcore: registered new interface driver usbhid
[ 0.951069] usbhid: USB HID core driver
[ 0.955542] TCP: cubic registered
[ 0.958926] NET: Registered protocol family 17
[ 0.963514] Key type dns_resolver registered
[ 0.967891] Registering SWP/SWPB emulation handler
[ 0.974088] ahci-5v: 5000 mV
[ 0.977433] usb1-vbus: 5000 mV
[ 0.980930] usb2-vbus: 5000 mV
[ 1.008330] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.020549] mmc0: new high speed SDHC card at address aaaa
[ 1.026500] mmcblk0: mmc0:aaaa SU16G 14.8 GiB
[ 1.032516] mmcblk0: p1 p2
[ 1.048600] ahci-sunxi 1c18000.sata: controller can’t do PMP, turning off CAP_PMP
[ 1.056118] ahci-sunxi 1c18000.sata: SSS flag set, parallel bus scan disabled
[ 1.063286] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 1.072249] ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo only pio slum part ccc
[ 1.081665] scsi host0: ahci_platform
[ 1.085670] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[ 1.093967] ehci-platform 1c14000.usb: EHCI Host Controller
[ 1.099601] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
[ 1.107447] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000
[ 1.128536] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[ 1.135581] hub 1-0:1.0: USB hub found
[ 1.139424] hub 1-0:1.0: 1 port detected
[ 1.144097] ehci-platform 1c1c000.usb: EHCI Host Controller
[ 1.149730] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[ 1.157574] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000
[ 1.178529] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[ 1.185490] hub 2-0:1.0: USB hub found
[ 1.189320] hub 2-0:1.0: 1 port detected
[ 1.193856] ohci-platform 1c14400.usb: Generic Platform OHCI controller
[ 1.200531] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
[ 1.208385] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400
[ 1.273388] hub 3-0:1.0: USB hub found
[ 1.277179] hub 3-0:1.0: 1 port detected
[ 1.281778] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[ 1.288415] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
[ 1.296321] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400
[ 1.363410] hub 4-0:1.0: USB hub found
[ 1.367196] hub 4-0:1.0: 1 port detected
[ 1.371585] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:05 UTC (5)
[ 1.383672] vcc5v0: disabling
[ 1.386660] vcc3v0: disabling
[ 1.428548] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.458281] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.466500] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.481923] devtmpfs: mounted
[ 1.485180] Freeing unused kernel memory: 240K (c0482000 – c04be000)
Mount failed for selinuxfs on /sys/fs/selinux: No such file or directory
[ 1.851801] random: init urandom read with 4 bits of entropy available
[ 2.030459] init: plymouth-upstart-bridge main process (43) terminated with status 1
[ 2.038588] init: plymouth-upstart-bridge main process ended, respawning
[ 2.099307] init: plymouth-upstart-bridge main process (53) terminated with status 1
[ 2.107552] init: plymouth-upstart-bridge main process ended, respawning
[ 2.150525] init: plymouth-upstart-bridge main process (56) terminated with status 1
[ 2.158584] init: plymouth-upstart-bridge main process ended, respawning
[ 2.200109] init: ureadahead main process (46) terminated with status 5
* Starting Mount filesystems on boot[ OK ]
* Starting Populate /dev filesystem[ OK ]
* Stopping Populate /dev filesystem[ OK ]
* Starting Clean /tmp directory[ OK ]
* Starting Populate and link to /run filesystem[ OK ]
* Stopping Populate and link to /run filesystem[ OK ]
* Stopping Clean /tmp directory[ OK ]
* Stopping Track if upstart is running in a container[ OK ]
* Starting Initialize or finalize resolvconf[ OK ]
* Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
* Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
* Starting Bridge udev events into upstart[ OK ]
* Starting device node and kernel event manager[ OK ]
* Starting Signal sysvinit that remote filesystems are mounted[ OK ]
* Starting load modules from /etc/modules[ OK ]
* Starting cold plug devices[ OK ]
* Starting log initial device creation[ OK ]
* Stopping load modules from /etc/modules[ OK ]
* Starting Uncomplicated firewall[ OK ]
* Starting configure network device security[ OK ]
* Starting configure network device security[ OK ]
* Stopping cold plug devices[ OK ]
* Starting load fallback graphics devices[ OK ]
* Stopping log initial device creation[ OK ]
* Stopping load fallback graphics devices[ OK ]
* Starting Mount network filesystems[ OK ]
* Starting Upstart job to start rpcbind on boot only[ OK ]
* Starting userspace bootsplash[ OK ]
* Stopping userspace bootsplash[ OK ]
* Starting Send an event to indicate plymouth is up[ OK ]
* Stopping Upstart job to start rpcbind on boot only[ OK ]
The disk drive for / is not ready yet or not present.
keys:Continue to wait, or Press S to skip mounting or M for manual recovery
* Starting configure network device[ OK ]
rpcbind: cannot create socket for udp6
rpcbind: cannot create socket for tcp6
* Stopping Mount network filesystems[ OK ]
* Stopping Send an event to indicate plymouth is up[ OK ]
* Starting configure network device[ OK ]
* Starting RPC portmapper replacement[ OK ]
* Starting NSM status monitor[ OK ]
* Staring Bridge socket events into upstart[ OK ]

keys:
* Starting Signal sysvinit that local filesystems are mounted[ OK ]
* Starting Samba Winbind[ OK ]
* Starting SMB/CIFS File Server[ OK ]
arting configure network device security[ OK ]
* Stopping Mount filesystems on boot[ OK ]
* Starting Failsafe Boot Delay[ OK ]
* Starting Load gator driver module and launch gator daemon[ OK ]
* Starting flush early job output to logs[ OK ]
* Starting Load gator driver module and launch gator daemon[fail]
* Starting NFSv4 id name mapper[ OK ]
* Starting flush early job output to logs[fail]
* Stopping rpcsec_gss daemon[ OK ]
* Starting D-Bus system message bus[ OK ]
* Starting system logging daemon[ OK ]
tarting SystemD login management service[fail]
* Stopping SystemD login management service[ OK ]
* Starting NetBIOS name server[ OK ]
* Starting Samba Winbind[ OK ]
* Starting configure virtual network devices[ OK ]
* Starting SMB/CIFS File Server[ OK ]
* Starting mDNS/DNS-SD daemon[ OK ]
* Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated[ OK ]
* Starting Samba Winbind[ OK ]
* Starting SMB/CIFS File Server[ OK ]
* Stopping Reload cups, upon starting avahi-daemon to make sure remote queues are populated[ OK ]
* Starting CUPS printing spooler/server[ OK ]
tarting Samba Auto-reload Integration[ OK ]
* Starting SMB/CIFS File Server[ OK ]
* Starting cups-browsed – Bonjour remote printer browsing daemon[ OK ]
* Starting Samba Winbind[ OK ]
* Starting Samba Auto-reload Integration[fail]
* Starting SMB/CIFS File Server[ OK ]
* Starting Samba Winbind[ OK ]
* Starting SMB/CIFS File Server[ OK ]
* Starting Bridge file events into upstart[ OK ]
* Starting Samba Winbind[ OK ]
* Starting SMB/CIFS File Server[ OK ]
* Starting Samba Winbind[ OK ]
* Starting SMB/CIFS File Server[ OK ]
* Starting Samba Winbind[ OK ]
* Starting SMB/CIFS File Server[ OK ]
* Starting Samba Winbind[ OK ]
* Starting SMB/CIFS File Server[ OK ]
* Starting Samba Winbind[ OK ]
* Starting SMB/CIFS File Server[ OK ]
arting Samba Winbind[ OK ]
* Starting SMB/CIFS File Server[fail]
* Stopping SMB/CIFS File Server[ OK ]
* Starting Samba Winbind[fail]
* Stopping Samba Winbind[ OK ]
Wing for network configuration…
aiting up to 15 more seconds for network configuration…
ing system without full network configuration…
pping Failsafe Boot Delay[ OK ]
* Starting System V initialisation compatibility[ OK ]

Welcome to CubieNAS 4.03 on Ubuntu 14.04.1 LTS (GNU/Linux 3.18.0-rc4-31376-g8c27ecb-dirty armv7l)

* Documentation: https://help.ubuntu.com/
* Stopping System V initialisation compatibility[ OK ]
touch: cannot touch ‘/var/log/minidlna.log’: Read-only file system
* Starting System V runlevel compatibility[ OK ]
* Starting CPU interrupts balancing daemon[ OK ]
* Starting deferred execution scheduler[ OK ]
* Starting regular background program processing daemon[ OK ]
* Starting save kernel messages[ OK ]
* Starting save kernel messages[fail]
* Not starting internet superserver: no services enabled
/etc/rc2.d/S20seafile-server: 27: /etc/rc2.d/S20seafile-server: cannot create /home/seafile/logs/seafile.init.log: Read-only file system
/etc/rc2.d/S20seafile-server: 32: /etc/rc2.d/S20seafile-server: cannot create /home/seafile/logs/seahub.init.log: Read-only file system
* Starting OpenSSH server[ OK ]
Starting syncthiing for linaro
* Restoring resolver state… [ OK ]
touch: setting times of ‘/var/lib/sudo’: Read-only file system
root@cubieNAS:~# 30)Read-only file system: AH00091: apache2: could not open error log file /var/log/apache2/error.log.
AH00015: Unable to open logs
Action ‘start’ failed.
The Apache error log may have more information.
* Starting MySQL Server[fail]
* Stopping MySQL Server[ OK ]
r@cubieNAS:~# root@cubieNAS:~# 1m*
* The apache2 instance did not start within 20 seconds. Please read the log files to discover problems
Rrot@cubieNAS:~# root@cubieNAS:~# Stopping System V runlevel compatibility[ OK ]

root@cubieNAS:~# MemTotal: 1034376 kB
MemFree: 928988 kB
MemAvailable: 961560 kB
Buffers: 19780 kB
Cached: 55620 kB
SwapCached: 0 kB
Active: 72248 kB
Inactive: 18204 kB
Active(anon): 15128 kB
Inactive(anon): 372 kB
Active(file): 57120 kB
Inactive(file): 17832 kB
Unevictable: 0 kB
Mlocked: 0 kB
HighTotal: 270336 kB
HighFree: 251016 kB
LowTotal: 764040 kB
LowFree: 677972 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 15148 kB
Mapped: 17680 kB
Shmem: 420 kB
Slab: 10732 kB
SReclaimable: 4520 kB
SUnreclaim: 6212 kB
KernelStack: 704 kB
PageTables: 580 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 517188 kB
Committed_AS: 51996 kB
VmallocTotal: 245760 kB
VmallocUsed: 1200 kB
VmallocChunk: 230448 kB
root@cubieNAS:~# Broadcast message from root@cubieNAS
(/dev/ttyS0) at 1:02 …

The system is going down for power off NOW!
root@cubieNAS:~# ait-for-state stop/waiting
*
Stopping Webmin server in /usr/share/webmin
cat: /var/webmin/miniserv.pid: No such file or directory
/etc/webmin/stop: 4: kill: Usage: kill [-s sigspec | -signum | -sigspec] [pid | job]… or
kill -l [exitstatus]
* Stopping advanced IEEE 802.11 management hostapd [ OK ]
* Stopping internet superserver inetd [ OK ]
/etc/rc0.d/K20seafile-server: 45: /etc/rc0.d/K20seafile-server: cannot create /home/seafile/logs/seafile.init.log: Read-only file system
/etc/rc0.d/K20seafile-server: 46: /etc/rc0.d/K20seafile-server: cannot create /home/seafile/logs/seahub.init.log: Read-only file system
Stopping syncthing for linaro
* Stopping NFS kernel daemon [ OK ]
exportfs: could not open /var/lib/nfs/.etab.lock for locking: errno 30 (Read-only file system)
exportfs: can’t lock /var/lib/nfs/etab for writing
exportfs: could not open /var/lib/nfs/.xtab.lock for locking: errno 30 (Read-only file system)
exportfs: can’t lock /var/lib/nfs/xtab for writing
* Unexporting directories for NFS kernel daemon… [ OK ]
* (not running)
* Asking all remaining processes to terminate… [ OK ]
ll processes ended within 1 seconds… [ OK ]
rpcbind: rpcbind terminating on signal. Restart with “rpcbind -w”
* Unmounting temporary filesystems… [ OK ]
* Deactivating swap… [ OK ]
* Will now halt
[ 169.118722] reboot: Power down

kept running for a few seconds, but due to read only root filesystem I just did a powerdown after a while

Leave a Reply

Your email address will not be published. Required fields are marked *

Protected with IP Blacklist CloudIP Blacklist Cloud